Brief introduction to several phenomena often appearing in toner cartridges of copier toner cartridge manufacturers

發(fā)布日期：2018-08-31 作者：Guangtian 點(diǎn)擊：

The toner cartridge is an essential part of the copier. When we go to work to copy things, the copier always has such problems or problems. In addition to the problems of the copier itself, it is a small problem with the toner cartridge. If we master these problems, it will save money. More is to save a lot of trouble, the following copier toner cartridge manufacturers Xiaobian to share with you the problem of the problem often occurs when the toner cartridge is used.

In addition to damage to the casing, it is usually caused by the magnetic powder in the toner cartridge during transportation or during the use of certain customers. The solution is simple, just turn the drum core a few turns in the direction.

復(fù)印機(jī)硒鼓廠家

The front page of the file can be copied normally, but the back page will lose content or the text will appear black or even black or white, but the page copy is normal. This is because the page description information of the file is relatively complicated, resulting in insufficient copying machine memory. You can reduce the resolution of the copier by one grade and copy it. The good solution is of course to add the copier's memory.

When copying, there may be black (or other color) horizontal lines. This may be caused by damaged magnetic rollers or different axes, resulting in uneven gaps between the environmentally friendly toner cartridges. When this happens, transfer to (OPC). The toner on the surface of the drum is also uneven. After the toner cartridge is installed, the copier sometimes cannot reflect, the toner cartridge is continuously loaded on the copier, and the right rear corner is in place. Some of the toner cartridges are placed in the right rear corner position. Without the chip, the copier cannot recognize the powder. Box, you need to install the chip.

Some small black spots appear on the pages copied by the copier, which may be caused by scratches on the toner cartridge or the charging roller. Foreign matter or paper dust in the copier can scratch the drum. If the drum is damaged, there is no other way to replace it with a new one.