When the number of copies of the copier reaches a certain amount or a large amount of copying (such as 1 000 to 2,000 copies), the parts that are easily contaminated in the copier should be cleaned and maintained. It mainly includes removing dirt and dust from the contaminated parts such as photosensitive plates, electrode wires, shields, lenses, mirrors, pickup rollers, paper feed rollers, and platen glass, and blowing or wiping them. Copiers should always pay attention to dust, moisture, and vibration, and minimize the movement. If you want to move, you must move horizontally and not tilt. When adding new copy paper, it may cause paper sticking due to static electricity. Please loosen the paper and arrange it.

    During the rainy season, the paper is easily damp. Please tidy up the new paper and dry the damp paper before use. When removing the jammed paper, do not pull the paper too hard, which will cause damage to the parts. The copy paper uses 80 grams of high quality, high whiteness, and fine smoothness of paper texture, which can prolong the life of the copier drum and maintain good copying effect. If there is dirt on the platen glass of the dirt copier, it will be copied to the copy at the same time, so always keep the platen glass and the sponge pad clean.

    Always wash your hands in time after using the copier to eliminate any damage to your body from residual dust. When you find that the effect of copying has a heavy shadow, you may need to clean the lens on the copier.

    When the copier face shows the red light plus powder signal, the user should add toner to the copier in time. If the powder is not timely, the copier may malfunction or produce powder impact noise. When adding toner, shake the toner and manipulate it according to the original. Do not use substitute powder (false powder), otherwise it will cause faults such as flying powder, bottom ash, shortening the service life of the carrier, and because of the high waste toner rate, the actual copying amount is less than 2/3 of the real powder. .

    Copier powder box manufacturers warm reminder: a good working environment, regular cleaning, refueling, adjustment is very necessary, must not save a few dollars, the purchase of unqualified paper, toner and the consequences are not worth the loss. The necessary maintenance can improve the working quality of the copier, prolong the service life and save maintenance costs.